Orion SpaceProbe 130 EQ: A Guide to the 130 mm Equatorial Reflector

The earlier version of this post contained only general selling text and no information about the telescope itself. This rewrite replaces it with a guide to the Orion SpaceProbe 130 EQ, a classic beginner reflector. Specifications come from the retailer Spectrum Scientifics’ product page. Orion’s own pages for this model were not available when we checked.

Verified specifications

From Spectrum Scientifics’ description and technical specifications:

  • Optical design: Newtonian reflector, rolled-steel tube
  • Primary mirror: 130 mm (5.1 in), spherical, with aluminium and silicon dioxide coatings
  • Focal length: 900 mm; focal ratio f/6.9
  • Eyepieces: Explorer II 25 mm (36x) and 10 mm (90x), 1.25-inch
  • Finder: 6×30 achromatic finder scope
  • Focuser: 1.25-inch rack-and-pinion
  • Highest / lowest useful magnification: 200x / 23x
  • Limiting stellar magnitude: 12.4; resolving power 0.89 arc-seconds
  • Mount: EQ-2 equatorial with slow-motion controls, setting circles and a 4.8 lb counterweight; latitude range 16° to 72°
  • Optional EQ-2M AstroTrack motor drive for automatic tracking
  • Optical tube: 32.5 in long, 9.7 lb; mount and tripod 12.0 lb; fully assembled 30.3 lb
  • Tripod height range: 35 in to 55.5 in
  • Also included: collimation cap and Starry Night software; one-year limited warranty

Why 130 mm matters

Aperture, the width of the main mirror, is the most important number for a telescope. It controls how much light is gathered and how much detail can be seen. A 130 mm mirror collects about 3.4 times as much light as a 70 mm lens, because light grasp grows with the square of the diameter ((130 ÷ 70)² is about 3.4). That is a big step up from small refractors and shows many more galaxies, nebulae and clusters.

How a Newtonian reflector works

Light enters the open top of the tube and travels down to the curved primary mirror at the bottom. The mirror reflects it back up to a small flat secondary mirror, which sends it out through the side of the tube into the eyepiece. Because the eyepiece is at the top side of the tube, you look in from the side rather than from the back.

Using the equatorial mount

An equatorial mount has a polar axis that must be tilted to your latitude and pointed towards the celestial pole, near Polaris in the Northern Hemisphere. Then you can follow objects across the sky mostly by turning one slow-motion control as the Earth rotates.

Setting up:

  • Set the latitude scale to your latitude.
  • Point the polar axis roughly north towards Polaris.
  • Balance the tube by sliding the counterweight until it stays still when released.
  • Use the slow-motion controls to centre and follow targets.

Collimation

Spectrum Scientifics notes that the SpaceProbe 130 EQ includes a collimation cap. Newtonian reflectors occasionally need their mirrors re-aligned, called collimation. The cap is a simple sighting tool that helps you centre the mirrors’ reflections. Collimated optics give noticeably sharper views, especially of planets.

Working out magnification

Divide the telescope’s focal length by the eyepiece’s focal length. With a 900 mm focal length:

  • The included 25 mm eyepiece gives 36x
  • The included 10 mm eyepiece gives 90x
  • An optional 6 mm eyepiece would give 150x, within the 200x highest useful figure

What can you see?

With 130 mm of aperture from a reasonably dark site:

  • The Moon’s craters, mountains and rilles in great detail
  • Jupiter’s cloud belts and its four bright moons
  • Saturn’s rings and its largest moon, Titan
  • Bright nebulae such as the Orion Nebula and the Lagoon Nebula
  • Many star clusters and the brighter galaxies, such as the Andromeda Galaxy

Tips for beginners

  • Align the finder by day on a distant object.
  • Let the mirror cool outside before observing.
  • Start with the 25 mm eyepiece to find objects, then increase power.
  • Never point at the Sun without a certified solar filter covering the front of the tube.

Who is it for?

The SpaceProbe 130 EQ is aimed at beginners who want plenty of aperture on a mount that can follow objects across the sky. It takes a little practice to set up the equatorial mount, but it rewards that effort with bright, detailed views of the Moon, planets and deep-sky objects.

Quick summary

  • 130 mm spherical-mirror Newtonian, 900 mm focal length, f/6.9.
  • 25 mm (36x) and 10 mm (90x) Explorer II eyepieces and a 6×30 finder.
  • EQ-2 equatorial mount, with an optional motor drive.
  • Assembled weight 30.3 lb.

Discover more from Astronomy-Stuff

Subscribe to get the latest posts sent to your email.